This blog is dedicated to anyone who is interested in goat packing. What is goat packing, you ask? Well, it is exactly like backpacking except instead of having to carry all of your equipment, a goat or several goats carries it for you. In this blog you will meet the goats which make up our pack goat company as well as see them in action from pictures and videos of our trips.

Friday, October 21, 2011

How to Saddle a Goat

Max thinking about destroying your roses :3
 So, you bought or made a goat pack saddle and are itching to saddle up your pack goat, but you find yourself at a loss for the technique of doing so. It really isn't all that difficult, that is, if you took the time to get your goat used to you feeling its belly so it won't try to bite you while you saddle it. The following step by step guides you through the absolute basics of saddling a goat. Mind, there are more definitive and expert sources which break down saddling into even simpler terms than this will, but they are usually locked away in expenisve books.This guide also assumes that the reader has basic knowledge about goat anatomy and handling techniques. Alrighty then! Let's move on to step one.

Step 1: Secure your goat's head.
This step speaks for itself. If on the trail, find a sturdy tree to tie the goat to. For this guide, we are using a milk stanchion since it renders the goat almost immobile.

Step 2: Get your saddle ready.
Again, not too complicated. You want to make sure all of the straps are sturdy (i.e. no tears, broken fasteners) and that the saddle blanket is in good shape.

Step 3: Place saddle on goat's back.

Alright, you want to make sure the saddle is in the right place on the goat as to not cause any unnecessary discomfort. The saddle should just touch the goat's withers. It should be far enough forward so that it rests just behind the goat's shoulder blades. The saddle should not touch the goat's hips.

Step 4: Fasten and cinch the front strap.

^^^Matchy Matchy^^^^^

Whew! That was exhausting, right? Okay, you want this strap to be a little loose, but just barely so. You should be able to fit your hand in between the goat's chest and the strap, but not both hands. You don't want to choke the poor thing!

Step 5: Cinch up the belly strap.


You want this strap to be pretty tight. This is what really holds the pack on the goat, a fact that was learned by me on the trail. If you don't make this strap tight, the pack will slide off. You really want to make sure the strap is a few inches behind the front legs, that way you won't be restricting the flow of air into the goat's lungs. Do Not cinch the strap so tight that the goat has trouble breathing.

Step 6: Slide on the back strap.

 Pretty self explanatory. This strap does not have to cinched very much. If it's too tight, the goat will have a strange, uncomfortable-looking gait. This strap prevent the pack from slipping forward on a steep downhill descent.

Well, you are done with the saddling part! All that's left is hanging the packs/panniers over the crossbucks, then you're good to go! Here is the end result:
I hope you all found this helpful!






Wednesday, September 28, 2011

Monday, June 6, 2011

Now broadcasting live video of the goats every morning!

Hello fellow goat lovers and/or packers! Starting today you will be able to see the goats in their morning and nighttime pasture for a few minutes every Saturday and Sunday sometime in the morning between 8 and 10 AM pst.

Thursday, June 2, 2011

Our new little guard dog!






This is our new little guard dog for our goats, Lambert. According to the people we bought him from, he is a pure bred Great Pyrenees, although he is the wrong color and doesn't have the back two dew claws. To make a long story short, we have learned not to buy a dog without papers, and our trust has been somewhat betrayed. All that aside, he is an adorable dog and if he turns out to be large we will definitely use him as a guard dog.

Friday, May 13, 2011

Seat covers: an inexpensive saddle blanket



While the wood, straps, nuts, and bolts that go into making the pack saddle are relatively inexpensive, a commercial felt saddle blanket can cost upwards of thirty dollars for the smallest sizes. Since goat packing is supposed to be more economical than mule/pony packing, than there ought to be an economical solution to this problem. The answer: bucket seat covers! Seat covers are cheap, lightweight, and depending on which one you buy, can fit snugly under a goat pack saddle. A trip to Pep Boys can get you a couple of inexpensive yet durable bucket seat covers without breaking the bank. We have opted for this route with two of our pack saddles since they didn't come with a saddle blanket when we got/made them.

Please wait
Image not available

If anyone wishes to go this same route, there are a few things to keep in mind. First, the seat cover cannot have any springs inside it, as these can chafe. Second, the seat cover should be lightweight, ideally weighing less than a pound or so, though it shouldn't be so flimsy that the goat can't even wear the pack. Third, the seat cover has to be the right width and length so that it can be folded underneath the saddle and still fit snugly over the goats back. Finally, the seat cover should be made so that at least a little air can flow through it, which will help to keep the goat from sweating and getting overheated.